Skip to main content

Supporting Information: Faculty of Health and Life Sciences

This is version 1.0 of the Supporting Information for the Faculty of Health and Life Sciences, which applies from the 2026/27 academic year onwards. This supporting information is owned by the Faculty of Health and Life Sciences. Please contact [email protected] for any matters related to this supporting information.

Contents

  1. Purpose and Scope
  2. Supplementary Information - Academic Regulations for Taught Programmes
  3. Supplementary Information - Assessment Policy and Procedures
  4. Other Supplementary Information
  5. Students awarded according to the Rules for Award

1. Purpose and Scope

The purpose of this supporting information is to set out principles and procedures which relate to assessment in the Faculty of Health & Life Sciences, encompassing the following Schools:

School of Biology

School of Biomedical Sciences

School of Molecular & Cellular Biology

The supporting information underpins and should be read alongside the Academic Regulations for Taught Programmes and the Assessment Policy & Procedures.

2. Supplementary Information – Academic Regulations for Taught Programmes

This section contains information supplementary and complementary to the Academic Regulations for Taught Programmes.

2.1 Credit and Progression (Academic Regulations Section 8)

To successfully progress on a Work Placement/ International work placement programme, students must:

  • Obtain a pass in the BIOL8001 Training in the Workplace module.

To successfully progress on an International Study programme, students must:

  • Obtain a pass in the BIOL9001 Study Year Abroad module.

To successfully progress on an International Study & Placement Year combined programme, students must:

  • Obtain a pass in BIOL9002: Combined Study Abroad and Work Placement Year

To successfully progress on a Horizon International Study programme, students must:

  • Obtain a pass in both the LEED9000 Horizon Year Abroad & MODL3150 Intercultural Communication and Global Citizenship: A Critical Approach for the Horizon Year Abroad modules.

Students registered on the BSc may have the option of transferring to the MBiol programme at the end of FHEQ level 5 if they meet the MBiol progression criteria and if there are places available on the corresponding MBiol programme.

To successfully progress from FHEQ level 5 to FHEQ level 6 on the MBiol programme or to transfer from FHEQ level 5 BSc to FHEQ level 6 MBiol programme, students must:

  • Obtain 100 credits or more at Level 5
  • Pass modules listed in the programme specification that are required for progression
  • Achieve an overall credit weighted year average, normally of at least 65%.

If a student’s performance falls short of the progression criteria for the MBiol, then transfer to the equivalent BSc 3 year programme would normally result and the student will be required to fulfil the BSc FHEQ level 5 to FHEQ level 6 progression requirements.

To successfully progress from FHEQ level 6 to FHEQ level 7 on the MBiol, students must:

  • Obtain 100 credits or more at FHEQ level 6
  • Pass modules listed in the programme specification that are required for progression
  • Achieve an average normally of at least 65% in the FHEQ level 6 project components and an overall credit weighted year average, normally of at least 65%.

If a student’s performance falls short of the progression criteria for the MBiol, then resit opportunities in the failed module(s) may be available if, on successful completion of the resit, it would enable the student to achieve the progression criteria. If, however, the resit opportunity would not enable them to reach the progression criteria or if student performance falls short of the progression criteria even after a resit, they would be unable to proceed to FHEQ level 7 (the fourth year of the programme). Instead, the student would be classified for an intermediate concluding qualification of the equivalent three-year undergraduate programme provided the requirements for such an award have been met.

3. Supplementary Information – Assessment Policy and Procedures

This section contains information supplementary to the Assessment Policy and Procedures (AP&P) where Schools are required to develop and define their approach.

3.1 Setting and Approval of Assessment Methods (AP&P section 4)

3.1.1 Examinations

Question Papers with model answers are prepared by module leaders (in consultation with the teaching team if applicable) and submitted to the School assessment team, by agreed deadlines, for approval by the relevant sub-committee within the School. All such materials are also made available to the relevant External Examiner. Records of this process are retained within each school.

3.1.2 Coursework

The specification of coursework will relate clearly to the module learning outcomes and is the responsibility of the module leader, in consultation with the teaching team. Assessment briefs undergo internal checking prior to release to students. As a minimum the briefs are checked by a second member of academic staff (who is not the person responsible for setting the assessment) for clarity of instructions, alignment with learning outcomes and the appropriateness of the marking scheme. These checks take place for all components of summative assessment when first set or amended.

External Examiners may be consulted about the development of coursework questions, will have access to coursework as part of their annual review, and may incorporate comments on the appropriateness of assessments and questions within their report.

3.2 Registration for Assessments (AP&P section 5)

For students commencing programmes of study in September, resit examinations are normally held in the August resit period, though some taught postgraduate coursework resits may occur in September.

Some modules, such as laboratory and project modules, may not be offered as August resits. However, if students have attended and successfully completed the practical component(s) of a module but have failed to submit one or more satisfactory assignments (which may be written reports, presentations, posters, etc.), at the discretion of the Progression and Awards Board, a resit opportunity may be offered in August.

Schools will make it clear either in the module catalogue or assessment brief which modules do not have an August resit opportunity, or have an alternative resit assessment, or require students to resit the year internally when final module marks are published.

In some cases, where a student has a large number of resits (e.g. 60 or more credits) Schools may recommend (or require) that the student defers one or more of their resits, rather than take them all at the next opportunity. It may be appropriate to sit these as August resits or as internal or external resits in the next academic session. Any decisions made will be approved by the School Special Circumstances Committee and/or the Progression and Awards Board. Students will be advised as part of the resit communications following results publication.

The deadline for submission of resit work will be set by the Assessment Board. Resubmitted coursework will be marked using the full marking scale and where work is being submitted to redeem a V Code, (see ‘Explanation of Marks’ for further details) it must meet the minimum pass mark of 40 (50 for M Level work).

3.3 Submission of Coursework (AP&P section 6)

There may be some instances where it is appropriate to set a deadline at an alternative time/day to 2pm. All exceptions to the 2pm coursework deadline will be approved by the Associate Pro-Vice Chancellor for Student Education and specified in the Assessment brief/Minerva area.

3.4 Late Submission of Coursework (AP&P section 6.4)

There are some types of assessment where late submission is not normally permitted. For example:

  • Assessment marked on a pass/fail basis;
  • Where model answers and/or equivalent in the form of feedback is provided shortly after submission
  • When students miss a presentation, field course or practical work (and no further opportunity is available);
  • Some short duration coursework;
  • Other assessment as appropriate.

In all cases, the assessment brief will make it clear if late submission is not permitted and/or resit opportunities may be curtailed if assessment is missed or submitted late.

3.5 Resubmission of Own Work (AP&P section 6.5)

Whether or not resit submissions can be re-worked for a new submission will be determined on a case-by-case basis, taking into account the nature of the task, the purpose of the assessment, the relevant learning outcomes and competence standards, and the student's individual circumstances. Student will receive specific instructions as part of any resit communications.

3.6 Use of Systems to Identify Academic Integrity (AP&P section 7.2)

Where systems are in use that generate a ‘similarity’ report, such as Turnitin, module leaders take responsibility for checking similarity reports, although they may delegate this task to other members of staff if necessary.

Schools will provide an introduction to systems such as Turnitin during the first semester of study to support understanding of academic integrity.

  • Undergraduate Programmes:

All FHEQ level 4 students receive direction regarding academic integrity during their skills/tutorial modules and are also required to complete the on-line academic integrity tutorial and quiz.

Early in FHEQ level 4 students may see an example of a similarity report, as long as this is under academic supervision. At FHEQ level 5 and above, students will not be provided with a similarity report.

All FHEQ level 5 and level 6 students receive reminder information on academic writing skills and referencing, which may be delivered through the compulsory tutorial/skills modules and/or pre-recorded online content. There are also integrity tutorial and test units specific to each level which should be completed at the start of each session.

  • Postgraduate Taught Programmes:

Students will be expected to attend a session on Academic Integrity early in semester 1, which will include ‘When and How to Reference’ and advice on good academic practices to avoid offences of academic integrity. Students will also be required to complete all the on-line academic integrity tutorial and quizzes. Additionally, students will find further information on Minerva, linking through to resources such as the on-line referencing tutorial at Skills-referencing.

3.7 Referencing (AP&P section 7.4)

Students should use the official University of Leeds version of the Harvard referencing style, unless otherwise clearly stated in the relevant Assessment Brief.

Guidance on how to source citations within the text and how to reference different types of material is available on the referencing pages of the Library website. Marking of all submitted coursework will be informed by this guidance and will correspond to the style outlined on the Library’s referencing website pages.

3.8 Assessment Marking and Marks (AP&P section 8.1.3)

Students with a specific learning difficulty will be provided with an electronic coversheet, which they must attach to their work if they wish to flag their disability. This is the student’s responsibility to do and is applicable to any submission on any module taken by the student. Where attention to detail in spelling, grammar and punctuation are part of the assessment criteria, the work will be marked accordingly, but with feedback that takes into account the developmental needs of the student.

3.9 Moderation: Check Marking and Double Marking (AP&P section 8.2)

3.9.1 Check Marking

  • Coursework

Prior to any provisional marks being returned to students, all marks will be statistically analysed (mean, SD, spread etc.) irrespective of level, assessment type and weighting, and compared to previous cohorts where equivalent assessment exists. Where there are multiple markers, this analysis will be carried out at the level of the marker where feasible and on the overall component mark.

Where apparent discrepancies are identified as deemed by the module leader (or nominee) then a sample will be check marked and marks modified (if appropriate) prior to return to students. Depending on the type of assessment the check marking may involve checking marks are calculated accurately or that the marks awarded for the work are reflective of the grading criteria.

All work marked by PhD students, new staff and staff external to the university marking for the first time will be check-marked. In addition, where PhD students and/or new staff and/or external staff to the university mark work they will be supported and provided with guidance, this could involve monitoring, sample marking or discussions before, during or after marking. The minimum expectation for check marking is 10% of the work, plus any fails.

Checks and any modification to marks will be reported by the module leader (or nominee) as soon as possible but in time for the relevant assessment board.

  • Examination/Online Time-Limited Assessment (OTLA) Scripts

The agreed system for providing evidence of effective marking involves annotation and check marking of degree level (FHEQ levels 5, 6 and 7) scripts.

  • Pass/Fail Placement Reports and Work Profiles (BIOL8001/9002)

All Placement Reports and Work Profiles will be check marked by the Placement Tutor as described above. Any Reports or Work Profiles deemed to have failed by the primary assessor (normally the Academic Tutor) will be independently double marked by the Placement Tutor to establish beyond doubt whether the report or Work Profile is deficient as described in the Fail category of the Marking Criteria. If agreement cannot be reached between the two assessors a third assessor will mark the work with the final decision being that of the majority grading.

3.9.2 Double Marking

Final year/research (capstone) projects are double marked. The rationale for this is based on typically larger credit value, the student-led or independent nature of the topic, and one-to-one supervision conventions (typically supervisors support and mark some students on the module and double marking ensures that one or more of the markers is independent).

Every final year/research (capstone) project (FHEQ level 6/7) is assessed under multiple assessment criteria for contributions such as; the process/execution phase (e.g. laboratory/research performance), written report(s), viva, poster or oral presentation where appropriate. The process/execution phase is (and can only be), assessed by the supervisor. Other aspects are normally assessed independently by at least two assessors. If assessors disagree by more than 10%, then they meet to agree a mark and provide a rationale for how the agreed mark was reached. If the assessors agree to within a degree class (10%) the marks are averaged. Where the two assessors cannot agree a mark, a third assessor will be required to mark the work. If the third assessor’s mark is within 10% of one of the initial assessors, the final mark is the average of the two closest marks. If not, all three marks will be averaged.

3.10 Marks Return (AP&P section 8.3)

Usually, students who submit by the original deadline will receive provisional marks and feedback before their next assessment for the module is due, wherever possible given module constraints, as per the University expectations. For work submitted late or with extension, provisional marks and feedback will be returned correspondingly, normally no later than 15 days after the ‘Extension/Late’ submission areas closes.

At the end of semester 2, a significant amount of administrative work is undertaken which involves confirming, checking and processing marks to ensure Progression and Awards Boards can take place. If students submit assessment for any modules at this time, the School will aim to provide provisional marks and feedback in the normal timeframe, but final results will not be released until the University’s official publication date.

Examination/OTLA marks & feedback will normally be made available as comments on the written submissions via Minerva.

3.11 Penalties for Not Meeting Assessment Requirements (AP&P section 8.4)

Assessment briefs will normally include certain requirements. Students should pay careful attention to the instructions they are given in every assessment brief e.g. the assignment length, file naming or formatting requirements etc. If the marker determines that the task has not been completed in accordance with these instructions, this will be reflected in the mark awarded and the feedback given.

Unless otherwise indicated in the assessment brief students must declare the length of their assignment on their submitted work.

The following penalties will be applied before any late submission penalty:

  • Assessments with word limits:

Penalties will be applied when the stated count for a piece of written work is >5% over the word limit. 5% of the available marks will be subtracted from the true mark for the piece of work and an additional 5% of the available marks will be deducted for each additional 5% that the piece of work exceeds the word limit up to a maximum of 25% of the available marks. For example, if an assessment would be awarded a mark of 65/100, and the word limit is 600 words, but the submission contains 650 words, then the awarded mark will be 65 minus 5 meaning a mark of 60 will be awarded.

For coursework assignments, titles, sub-titles and in-text citations, are included in the word count, but not reference lists, coursework coversheet, content pages, figures, tables, legends or appendices. The same is true for OTLA essay answers, with the exception that essay questions, when used as the essay title, are not included in the word count.

Failure to declare a word count or declaration of a falsified word count, will incur a penalty of 5% of available marks, in addition to any over-length penalty. Schools will investigate any such occurrences and depending on the outcome may take formal disciplinary action.

  • Assessments with page limits:

Penalties will be applied when a piece of written work is over the page limit. 5% of the available marks will be subtracted from the true mark for each page that the piece of work exceeds the page limit to a maximum of 25% of the available marks. Titles, contents pages, figures, tables, and legends are included in the page count. Reference lists or appendices and the coursework coversheet are not included within the page count unless otherwise specified in the module documentation. Failure to declare a page count, or declaration of a falsified page count, will incur a 5% penalty, in addition to any over-length penalty. The School may also take formal disciplinary action.

Work submitted for assessment that is greater than or equal to 25% over the published word / page limit will be penalised by 25% of the available marks and will be returned to the student unmarked, with a requirement to resubmit. Late penalties will be applied from 2pm, 2 working days from the date of notification until the work is resubmitted.

  • Assessments with time limits (e.g. live and recorded oral presentations, podcasts etc.)

Where an assessment has a specific time limit, any content occurring after the time limit has been reached will not normally be marked. In the case of live presentations students may be asked to stop when the time limit is reached, or the assessor may cut them off.

  • Anonymous submission

It is a student’s responsibility to follow instructions regarding the submission of assessment that enable anonymous marking, such as the correct use of student identification numbers (SID) in electronic file names. Failure to do so may remove the ability to mark anonymously and may incur a penalty should this be part of the assessment requirements (check the Assessment brief/Minerva area for details).

3.12 Feedback to Students (AP&P section 9)

The type of feedback given on each assessment may vary, for example, written individual feedback on coursework or examination/OTLA scripts, general oral feedback given to the whole group and individual face-to-face feedback (for example in personal and academic tutorials), and immediate feedback on on-line tests are just some examples of the most regularly used formats.

Our processes will provide students with individual feedback that is fit for purpose, in an agreed timeframe. Normally individual pieces of work by students will be returned with feedback and feed forward commentary on the work itself. Students on each module will be notified through Minerva announcements when this is ready for review. In addition, students may receive generic feedback relating to the performance of the cohort as a whole. Generic feedback can supplement individual feedback and can often be provided more quickly.

Usually, coursework submitted by the original deadline will receive feedback alongside the provisional marks as indicated in the ‘Marks return’ section above

Occasionally, an exception to the feedback timeline guidance might need to be made. The most common reasons for this are occurrences outside of the School’s control, such as staff illness. If this happens, students will be told why the date has been changed and the School will provide a new date for when students can expect their feedback.

Given that the final year/research (capstone) project module is such a large and integral part of a students’ degree, the marking and review process takes longer and so the feedback associated with this module will be provided after the Award Boards have taken place and the marks/degree classifications are published. Note that for project reports students will already have received formative feedback on sections of their draft by their supervisor

Exams will have more limited feedback given the format and timescale of the assessment. Where it is considered useful to the class as a whole, students may also be provided with generic feedback via the module manger. This may take the form of written notes on common errors, a live feedback session or a pre-recorded video.

Some formats of assessment undertaken in the formal examination period (e.g. OSCE, practical lab exams) may return feedback to students in an alternative way (e.g. by email or hard copy).

Engaging with the feedback received is an important part of the learning experience. Students are expected to be active in obtaining, reflecting on and acting on the feedback given. Feedback is provided in many different ways and students are expected to make use of the range of different feedback opportunities available to them.

Students should take up the opportunities for formative assessment and should ask for support if needed. Students can find additional information and guidance on how to make the most from the feedback they are given on the Library academic skills webpages.

To help students get the most from their feedback, they will be provided with opportunities to discuss feedback and academic progress with staff. This is done by encouraging students to use their academic personal tutorial meetings and/or make appointments with academic staff to seek further feedback.

3.13 Timings of Assessment Committees (AP&P section 11.4)

Schools follow the standard timelines in relation to Assessment Committees.

3.14 Publication of Module Marks and Classifications (AP&P section 12)

Provisional marks for semester 1 modules in the Schools will normally be released by the start of week 5 in semester 2. These marks will be available on Minerva. As these marks are provisional, they are therefore subject to change until finalised at the Progression & Award Board at the end of the academic session.

Schools will not publish students’ classification, provide written confirmation of it nor discuss it prior to the official publication.

4. Other Supplementary Information

4.1 Timing of exams

Occasionally, Schools may organise examinations outside of the University’s designated examination periods. These are called Ad Hoc Examinations. This will only be done where there is a reason the examination cannot be held during the designated examination period. They are run in the same way as other examinations held in the designated examination periods.

4.2 Calculators

Calculators are only allowed in certain exams/assessments. The module leader will confirm whether a calculator can be used on the assessment.

Where calculators are permitted:

  • Any basic (i.e., non-programmable) calculator is allowed.
  • Examples of commonly used calculators that are allowed include the Casio FX-85 series and the Casio FX991 series.
  • If you are not sure whether your calculator is non-programmable then check the manufacturer's website. Any calculator that is marketed as "programmable" or "graphic" is unlikely to be allowed

4.3 Coursework

A two-submission area system is normally in use for modules within these Schools. The initial submission box for ‘On time’ work submitted by the original published deadline, and a second ‘Extensions/Late’ submission area. The ‘Extensions/Late’ submission area will remain open for a maximum 14 days from the original published deadline. Students should be aware that feedback and marks for work submitted to the ‘Extension/Late’ submission area will normally be returned within 15 working days from that area closing. Schools will only accept the coursework, which is submitted by the deadline, regardless of whether a student accidentally submits the wrong coursework or an incomplete draft. Only the final submission will count.

When students are granted an extension to a coursework deadline (due to mitigating circumstances), the new deadline may not coincide with the usual term dates and may be in a period when the University is closed. If this is the case, we will not be able to offer the same level of support that would normally be provided during term time.

Students are provided with and expected to submit a coversheet with each piece of work (available to download from the Minerva module area in the Assessment & Feedback> School assessment information section). This carries the relevant academic declaration of integrity and supports anonymous submission.

4.4 Group work

Students should be aware that the academic integrity of submitted group work is evaluated in the same way as for individual submissions, and penalties for any malpractice identified are likely to be applied to the whole group.

Where students have worked and have submitted a piece of assessed coursework as a group, where there is evidence that members of the group have not contributed equally, the Module Leader may decide to adjust an individual’s returned mark in line with peer marks or other clearly explained process as outlined in the module area in Minerva.

4.5 Mitigating Circumstances deadlines

Schools deadlines:

In order for any requests to be processed in a timely manner students must ensure they have submitted their applications by the following deadlines:

DateTimeNotes
27 January 2027By 5pmFor any applications concerning semester 1 modules and assessments.
09 June 2027By 5pmFor any applications concerning semester 2 modules and assessments.
25 August 2027By 5pmFor any applications concerning August resit modules and assessments.
07 October 2027By 5pmFor any applications concerning Taught Postgraduate resit or project modules and assessments.

4.6. Placements

Schools aim to be supportive of their students applying for industrial placements or work, however unfortunately there are occasionally times when a clash with assessment occurs. The schools have an agreed procedure that they will follow in these instances. However, it is the students’ responsibility to flag any clashes well in advance and alternative arrangements may not always be possible. Please contact [email protected] in the first instance.

4.7 Prizes

A range of prizes for students are available.

5. Students awarded according to the Rules for Award

The Academic Regulations for Taught Programmes superseded the Rules for Award following the 2023/24 academic year. Awards for students who commenced their current programme at Leeds before the 2022/23 academic year or commenced their final year of study before 2024/25 academic year will be determined using the degree classification algorithm from the Rules for Award (iteration A), which includes provision for academic discretion.

Academic discretion, as described in the Rules for Award, applies to students being awarded under these circumstances:

Any student with a Classification Average falling within the discretionary band should be selected for consideration. The discretionary band is 0.05 below a classification threshold for Bachelor’s Degrees with Classified Honours and 0.10 below a classification threshold for Foundation Degrees, Undergraduate Diplomas, Graduate Diplomas and Certificates, and Taught Postgraduate Awards

  • In the Schools of Biology, Biomedical Sciences and Molecular & Cellular Biology, the following criteria for academic discretion apply:

Normally at least 60 credits in the higher class in Level 3 modules

AND

At least 100 credits at the higher class in Level 2 and Level 3 modules combined.

  • Intercalated degrees classification

As an intercalated degree candidate only studies for one year in the Faculty, decisions must be made only on the performance profile for this year. The student may only be promoted to the higher class than indicated by the classification scale mark grade, if the following conditions are met:

Normally that a student has achieved at least 60 credits in the higher class in the intercalated year.

  • Integrated BSc/MBiol/MSci degree classification

Students must achieve a mark of at least 5.0 at Level 5 and will only have remained on the programme by having a higher average score across Levels 2 and 3 and therefore there is no option for an award of a third class degree. The student may normally only be promoted to the higher class than indicated by the classification scale mark grade, if the following conditions are met:

Normally at least 80 credits in the higher class at Level 5

AND

At least 120 credits in the higher class at Levels 3 and 5 combined.